Rohde & Schwarz SMBV100B, User Manual

Page: 858 / 1030

Remote Control Commands
R&S
®
SMBV100B
856 User Manual 1178.4460.02 ─ 03
[:SOURce<hw>]:LIST:INDex:STARt <Start>
[:SOURce<hw>]:LIST:INDex:STOP <Stop>
Sets the start and stop index of the index range which defines a subgroup of fre-
quency/level value pairs in the current list.
Parameters:
<Start>/<Stop> integer
Index range
Only values inside this range are processed in list mode
Range:
0 to list length
*RST: 0
Example: See Example "Create an RF list and activate the list mode"
on page 850.
Manual operation: See " List Range from/to " on page 339
[:SOURce<hw>]:LIST:MODE <Mode>
Sets the list mode.
The instrument processes the list according to the selected mode and trigger source,
see
LIST:TRIG:SOUR AUTO, SING or EXT
.
Parameters:
<Mode> AUTO | STEP
AUTO
Each trigger event triggers a complete list cycle.
STEP
Each trigger event triggers only one step in the list processing
cycle. The list is processed in ascending order.
In this mode, you can select between
LIST:TRIG:SOUR SING
or EXT
.
*RST: AUTO
Example: See Example "Create an RF list and activate the list mode"
on page 850.
Manual operation: See "Mode" on page 337
[:SOURce<hw>]:LIST:POWer <Power>
Enters the level values in the selected list. The number of level values must corre-
spond to the number of frequency values. Existing data is overwritten.
Parameters:
<Power> <Power#1>{, <Power#2>, ...} | block data
You can either enter the data as a list of numbers, or as binary
block data.
SOURce Subsystem