manualshive.com logo in svg

Rohde & Schwarz SMBV100B, User Manual

Share
Download
Rohde & Schwarz SMBV100B User Manual Download Page 88

Configuring the Internal Baseband Source

R&S

®

SMBV100B

86

User Manual 1178.4460.02 ─ 03

Waveforms can be generated for example with the signal generation software
R&S

 

WinIQSIM2 or the R&S

®

Pulse Sequencer software.

●

The instrument provides different functions to generate waveforms 

Internally

.

–

Some of the digital standards firmware options provide the possibility to store
the current signal settings into a waveform file. These waveform files can be
loaded in and processed as multi-carrier or multi-segment signal by the ARB
generator.
See also 

Chapter 3.6, "Using the Arbitrary Waveform Generator (ARB)"

,

on page 145.

–

Multi-carrier waveforms consisting of carriers modulated by different baseband
signals can be configured and created internally. Such multi-carrier waveform
files are required to simulate complex multi-carrier scenarios with different
baseband signals, e.g. CDMA2000, 3GPP FDD, or signals in accordance with
the LTE-Advanced specifications.
See also 

Chapter 3.8, "Generating Multi-Carrier Signals"

, 

on page 223.

–

Provided the instrument is equipped with the corresponding option, it is also
possible to generate multi-carrier waveforms consisting of unmodulated carri-
ers
See also 

Chapter 3.9, "Generating Multi-Carrier Continuous Wave Signal"

,

on page 241.

3.2

 

How to Access the Functions in the Baseband
Domain

To access the functions of the baseband generator

1. In the block diagram, select the "Baseband" block and navigate through the context

menu.

How to Access the Functions in the Baseband Domain

Summary of Contents for SMBV100B







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands