Configuring the RF Signal
R&S
®
SMBV100B
392
User Manual 1178.4460.02 ─ 03
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog?
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect
Select Source/Select ASCII Destination
In "Mode > Export", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select Source": selects the file to be exported
●
"Select ASCII Destination": defines the filename and the file path for the exported
file
Remote command:
[:SOURce<hw>]:LIST:DEXChange:SELect
[:SOURce<hw>]:CORRection:DEXChange:SELect
Import / Export
Imports or exports the selected data list file, depending on the current mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:EXECute
[:SOURce<hw>]:CORRection:DEXChange:EXECute
6.12.4
Using Power Sensors
The R&S
SMBV100B works with most of the R&S NRP power sensors and thus sup-
ports various application tasks. Using power sensors, you can for example determine
attenuation characteristics of downstream equipment or cables. You can use the mea-
sured values to compensate the losses with internal control functions or with an exter-
nal control circuit in real time.
R&S NRP sensors are highly accurate standalone measuring devices, suitable for a
wide range of applications. The devices communicate directly with the signal genera-
tor, calculate the average or peak power internally, include S-parameter correction and
return the measurement results to the generator.
The R&S
SMBV100B works with any sensor of the R&S NRP series and can perform
up to four power measurements simultaneously.
Check the firmware version of the R&S NRP sensors regularly. Update the firmware, if
necessary.
For updates, see the Rohde
&
in sec-
tion "Power Meters & Voltmeters".
You can perform the following functions when working with power sensors:
●
Chapter 6.12.4.1, "Connecting R&S NRP Power Sensors to the R&S
on page 393
Overview on the supported connectors, connection options and the required acces-
sories.
●
Chapter 6.12.4.2, "NRP Sensor Mapping"
Improving Level Performance
