Getting Started
R&S
®
SMBV100B
43
User Manual 1178.4460.02 ─ 03
Risk of touchscreen damage
Inappropriate tools or excessive force can damage the touchscreen.
Observe the following instructions when operating the touchscreen:
●
Never touch the screen with ball point pens or other sharp objects, use your fingers
instead.
As an alternative, you can use a stylus pen with a smooth soft tip.
●
Never apply excessive force to the screen. Touch it gently.
●
Never scratch the screen surface, for example with a finger nail.
●
Never rub the screen surface strongly, for example with a dust cloth.
For instructions on cleaning the screen, see
2.2.1.2
Keys
Utility Keys
The utility keys cause the R&S
SMBV100B to return to a defined instrument state and
provide information on the instrument and assistance.
For more information, refer to
Chapter 10, "General Instrument Functions"
Table 2-1: Utility keys
Utility Key
Assigned functions
[Preset]
Sets the instrument to a defined state
[Save/Rcl]
Saves and loads instrument setting
Accesses the file manager
[Local]
Switches from remote control to local (manual) control
[Setup]
Accesses the general instrument settings
[Help]
Displays context-sensitive help text
On/Standby
The [On/Standby] key switches the instrument from the standby to the ready state or
vice versa.
●
In the ready state, the LED is green. The instrument is ready for operation.
●
In the standby state, the LED is orange. The standby power mode keeps the power
switch circuits and the oven-controlled crystal oscillator OCXO active. In this state,
it is safe to switch off the AC power and disconnect the instrument from the power
supply.
Instrument Tour
