Rohde & Schwarz SMBV100B, User Manual

Page: 486 / 1030

File and Data Management
R&S
®
SMBV100B
484 User Manual 1178.4460.02 ─ 03
SCPI List
Contains a list of all SCPI commands corresponding to the current instrument settings.
See also "How to create a SCPI list with the current instrument settings in one step"
on page 596
Save
Saves the current instrument settings or the settings belonging to a digital standard
under the defined filename.
Remote command:
:MMEMory:STORe:STATe
on page 628
Refer to the descriptions of the firmware options for the correct syntax of the corre-
sponding SCPI commands:
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:STORe
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:DELete
Save Immediate x
Stores the current instrument setting in one of the intermediate memories.
These instrument settings are retained until a different instrument setting is stored in
the intermediate memory. When the instrument is switched off, the contents of the
intermediate memories are retained.
Remote command:
*SAV
on page 614
Exclude Frequency
The current frequency is retained when a stored instrument setting is loaded.
Remote command:
[:SOURce<hw>]:FREQuency[:CW|FIXed]:RCL
on page 825
Exclude Level
The current level is retained when a stored instrument setting is loaded.
Remote command:
[:SOURce<hw>]:POWer[:LEVel][:IMMediate]:RCL
on page 875
Recall
Restores the selected configuration.
During recall, the instrument considers all related settings, for example sweeps in
active state or lists. An error message indicates the settings which cannot be imple-
mented.
Remote command:
:MMEMory:LOAD:STATe
on page 627
Refer to the descriptions of the firmware options for the correct syntax of the corre-
sponding SCPI command:
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:LOAD
Recall Immediate x
Loads the selected configuration from one of the intermediate memories. A message
appears if no instrument configuration is stored in this memory.
Saving and Recalling Instrument Settings