Rohde & Schwarz 1424.7805K02, User Manual

Page: 36 / 530

Operating concepts
R&S
®
NRX
36 User Manual 1178.5566.02 ─ 09
► Tap the displayed settings , (1) in Figure 4-2 , to access the sensor settings.
The "Primary Sensor" dialog is displayed.
See
Chapter 7, "Sensor configuration" , on page 115.
► Tap the displayed limit values , (2) in Figure 4-2 , to change limit values.
The "Limit Monitor" dialog is displayed.
See
"Limit Monitor" on page 59.
► Tap the displayed measurement value or graph , (3) in Figure 4-2 , to change the
measurement type, assign a sensor, access the sensor settings, ...
The "Measurement Settings" dialog is displayed.
See
Chapter 6.1.4, "Measurement settings dialog" , on page 69.
► Tap an element in the navigation pane , (4) in Figure 4-2 , to configure the trigger,
the presentation of the measurement result and further measurement-specific set-
tings.
See
Chapter 6.1, "Configuration for all measurement types" , on page 52.
Tapping other areas in the measurement pane can open further dialogs, but these dia-
logs are measurement-specific and there is no general rule that applies to all measure-
ments.
4.1.3 Status information
The status information is displayed in the upper right corner, left from the notification
center. See
Figure 4-1 .
Table 4-1: Status symbols
Symbol Description Further information
Memory stick is connected and ready for use. Chapter 3.1.9, "Connecting USB and
external devices"
, on page 23
Memory stick is connected and initialization is in pro-
gress. When the moving green dot vanishes, the
memory stick is ready for use.
Rem
R&S NRX is in remote control. Chapter 4.3.2, "Returning to manual
operation (LOCAL)"
, on page 45
Manual operation