Rohde & Schwarz 1424.7805K02 User Manual Download Page 16

Page: 16 / 530

Welcome

R&S

NRX

User Manual 1178.5566.02 ─ 09

The brochure provides an overview of the instrument and deals with the specific char-
acteristics.

See

www.rohde-schwarz.com/brochure-datasheet/NRX

2.1.6

Release notes and open source acknowledgment (OSA)

The release notes list new features, improvements and known issues of the current
firmware version.

The open source acknowledgment and the license texts of open source software pack-
ages used in the R&S NRX software are provided under:

[System] > "Instrument Info" > "Help & Copyrights"

For further details, see

Chapter 10.2.4, "Help & copyrights"

on page 165.

See

www.rohde-schwarz.com/firmware/NRX

2.2

Key features

The R&S NRX supports:

●

Easy RF power measurements

●

Multi-channel measurements

●

RF pulse analysis

●

System integration

The R&S NRX is a versatile, user-friendly base unit.

●

Straightforward numerical and graphical display of measured values, plus intuitive
operation with touchscreen-based graphical user interface

●

Supports up to four R&S

NRP and R&S

NRQ6 power sensors.

●

Supports all sensor-dependent measurement functions

●

Hardware interfaces for remote control and triggering

●

Code emulation of the R&S

NRP2

●

Optional high-precision CW and pulse mode reference source module

●

Optional power reflection measurements with R&S

NRT

‑

Zxx directional power sen-

sors

Summary of Contents for 1424.7805K02



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1424.7805K02

Reviews:

Brands by name

Popular brands

Rohde & Schwarz 1424.7805K02, User Manual

Search results

Summary of Contents for 1424.7805K02

Reviews:

Brands by name

Popular brands