Rohde & Schwarz 1424.7805K02, User Manual

Page: 98 / 530

Measurement and display configuration
R&S
®
NRX
98 User Manual 1178.5566.02 ─ 09
In the upper pane, the measurement result is shown as a single trace measurement of
the primary sensor. The timeslots are indicated as rectangles. The selected timeslot is
indicated as colored area. You can change the timeslot configuration directly by using
touch gestures. If you have a channel calculation function running that involves
2
power sensors, a legend in the upper right corner shows the assignment of curve to
measurement channel.
In the lower pane, the selected timeslot is displayed with:
●
Measurement values:
–
"Av"
Average power within gate
– "Pk"
Peak power within gate
– "Cf"
●
Width
●
Borders, see t1, t2, t3, t4, t5 .
If you tap the lower pane, the Timeslot Configuration dialog opens.
6.7.2 Timeslot settings
Access: "Measurement Settings" > "Measurement Type" > "Timeslot"
The available settings depend on the selected result display.
Timeslot .........................................................................................................................98
Slots .............................................................................................................................. 98
Display .......................................................................................................................... 98
Resolution ..................................................................................................................... 99
Pos / Scaling ................................................................................................................. 99
Autoscale ...................................................................................................................... 99
t1, t2, t3, t4, t5 ............................................................................................................... 99
Rel .................................................................................................................................99
Trigger ........................................................................................................................... 99
Timeslot
Selects a timeslot for the measurement.
Remote command:
CALCulate<Measurement>[:POWer]:TSLot[:AVG]:SELection
on page 307
Slots
Available for the scalar displays.
Opens the "Timeslot Configuration" dialog, see Chapter 6.7.3, "Timeslot Configuration
dialog" , on page 99.
Display
See Chapter 6.1.1, "Display settings" , on page 52.
Timeslot