Rohde & Schwarz 1424.7805K02, User Manual

Page: 168 / 530

System settings
R&S
®
NRX
168 User Manual 1178.5566.02 ─ 09
Testing the user interfaces
1. Tap the test you want to perform.
A dialog with detailed test instructions is displayed.
2. Read and follow the instructions.
3. Exit the test.
Note: "Exit with PASS" only becomes available when the test is finished success-
fully.
The results, passed or failed, are displayed for each test.
Remote command:
TEST:DEVice[:ALL]
on page 391
TEST:DEVice:RESult?
on page 391
Creating information for troubleshooting
You can save information for troubleshooting on a memory stick.
1. Connect a memory stick to one of the USB interfaces.
2. Tap "Create R&S Support Information".
The created archive file (
*.tar.gz
) contains the following information:
● Software errors
● Hardware status
● Current device footprint
● Current device settings
If a memory stick is connected, the archive file is saved there.
Alternatively, you can transfer the information using secure shell (SSH). See
"SSH"
on page 160.
Remote command:
TEST:USB:STORage?
on page 391
10.5 Global settings
Access: [System] > "Global Settings"
Global settings