Rohde & Schwarz 1424.7805K02, User Manual

Page: 135 / 530

Saving and recalling settings
R&S
®
NRX
135 User Manual 1178.5566.02 ─ 09
3. Tap "Recall".
Preset ..........................................................................................................................135
Save / Recall Setup .....................................................................................................135
Save ............................................................................................................................ 135
Setup Name ................................................................................................................ 135
Recall .......................................................................................................................... 135
Preset
Sets the R&S NRX and the connected R&S power sensors to a defined initial state.
Thus, you can change parameter values from a well defined starting point.
If the default setting of the R&S NRX is not compatible with the power sensor, either
the default settings are adapted for the power sensor or a setting conflict results. See
also
Chapter 5.5, "Settings conflict" , on page 50.
For details on sensor settings, see the user manual of the R&S power sensor.
Remote command:
SYSTem:PRESet
*RST
Save / Recall Setup
Selects the setup file in which the instrument settings are saved.
Remote command:
MEMory:STATe:DEFine
MEMory:STATe:MAP
Save
Saves the current instrument settings in the selected setup file.
Remote command:
*SAV
Setup Name
Selects the setup file from which to load the instrument settings.
Remote command:
MEMory:STATe:DEFine
MEMory:STATe:MAP
Recall
Restores the selected instrument settings.
Remote command:
*RCL