Remote control commands
R&S
®
NRX
398
User Manual 1178.5566.02 ─ 09
Parameters:
<register_name>
Name of the correction table; allowed are alphanumeric charac-
ters and special characters.
<register_number>
Memory location of the correction table
0
Factory-set correction table, cannot be changed
1 to 9
Available memory locations
Example:
MEM:TABL:MAP "test5",5
Example:
MEM:TABL:MAP? "test5"
Manual operation:
See
MEMory:TABLe:MOVE
<string>...
Renames of the selected correction table.
Use
Setting parameters:
<string>
"<old name>","<new name>"
If the old name is incorrect, an error occurs.
Example:
MEM:TABL:MOVE "Test 1","test_5#"
Usage:
Setting only
MEMory:TABLe:RESet
Deletes the content of all frequency-dependent correction tables and resets the names
to factory default, "Table 1", "Table 2" and so on.
To delete the content of a specific table, use
.
Usage:
Event
MEMory:TABLe:SELect
<name>>
Selects one of the available offset tables for the following commands:
●
●
●
MEMory:TABLe:FREQuency:POINts?
●
●
●
Alternatively, you can use
CALCulate<Measurement>[:CHANnel<Channel>]:
.
Managing setups and correction tables
