Rohde & Schwarz 1424.7805K02, User Manual

Page: 252 / 530

Remote control commands
R&S
®
NRX
252 User Manual 1178.5566.02 ─ 09
Usage: Query only
13.6.6.2 Combining continuous average commands with buffering
See also Chapter 13.4, "Making measurements" , on page 188.
Parameter list for continuous average measurements with buffering
Parameter Description
<buffered_size> Mandatory. Number of requested measured values.
Corresponds to
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:SIZE
.
<expected_value> Optional. Value that is expected for the measurement.
<resolution> Optional. Limit up to which the measurement result probably is free of
noise.
Corresponds to
[SENSe<Sensor>:]AVERage:COUNt:AUTO:
RESolution
.
<source_list> Mandatory. Primary and secondary sensor. The number for each sensor
is preceded by the character
@
. The entire expression is enclosed in
parentheses.
Example: (
@
3),(
@
2)
Sensor C is the primary sensor, and sensor B is the secondary sensor.
CONFigure<Measurement>:ARRay[:POWer][:AVG]? <buffered_size>[,
<expected_value_or_source_list>, <resolution_or_source_list>, <source_list>...]
FETCh<Measurement>:ARRay[:POWer][:AVG]? <buffered_size>[,
<expected_value_or_source_list>, <resolution_or_source_list>, <source_list>...]
READ<Measurement>:ARRay[:POWer][:AVG]? <buffered_size>[,
<expected_value_or_source_list>, <resolution_or_source_list>, <source_list>...]
MEASure<Measurement>:ARRay[:POWer][:AVG]? <buffered_size>[,
<expected_value_or_source_list>, <resolution_or_source_list>, <source_list>...]
Measured average power measured by one power sensor with buffering.
Suffix:
<Measurement>
.
1 to 8
Measurement
Query parameters:
<buffered_size> <expr>
<expected_value_or_source_list>
<numeric> | <expr>
<resolution_or_source_list>
<numeric> | <expr>
<source_list> <expr>
For the parameter descriptions, see
"Parameter list for continu-
ous average measurements with buffering" on page 252.
Usage: Query only
Measurement settings and results