![Rohde & Schwarz 1424.7805K02 User Manual Download Page 142](http://html1.mh-extra.com/html/rohde-and-schwarz/1424-7805k02/1424-7805k02_user-manual_1477791142.webp)
System settings
R&S
®
NRX
142
User Manual 1178.5566.02 ─ 09
IPv4 Address ← IPv4 tab
Available if "Static" is set under
.
Sets the IP address of the R&S NRX.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress][:ADDRess]
SYSTem:COMMunicate:INET[:SELF]:ADDRess
Subnet Mask ← IPv4 tab
Available if "Static" is set under
.
Sets the subnet mask of your local subnet.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress]:SUBNet:MASK
SYSTem:COMMunicate:INET[:SELF]:SUBNetmask:ADDRess
Default Gateway ← IPv4 tab
Available if "Static" is set under
.
Sets the IP address of the default gateway.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway
SYSTem:COMMunicate:INET[:SELF]:GATeway:ADDRess
DNS Server ← IPv4 tab
Available if "Static" is set under
.
Sets the DNS server address of your local subnet.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress]:DNS
SYSTem:COMMunicate:INET[:SELF]:DNS:ADDRess
10.1.2
Remote settings
Access: [System]
> "Connections"
> "Remote"
Contains the settings for remote control.
The "Remote" dialog is divided into the following tabs:
Interface - VISA Resource table
................................................................... 143
............................................................................................... 144
.................................................................................144
............................................................................... 145
........................................................................................ 145
.......................................................................................145
Connections