Remote control commands
R&S
®
NRX
405
User Manual 1178.5566.02 ─ 09
SYSTem:COMMunicate:INET[:SELF]:SUBNetmask:ADDRess
<netmask>
SYSTem:COMMunicate:NETWork[:IPADdress]:SUBNet:MASK
<Mask>
SYSTem:COMMunicate:NETWork[:IPADdress]:MODE
STATic
is set.
Sets the subnet mask of your local subnet.
Parameters:
<Mask>
Consists of four blocks separated by dots, consisting of up to
3
digits. Example: 255.255.255.0
Range:
0 to 255 for each block
Manual operation:
See
SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname
<Hostname>
Sets the individual hostname of the R&S NRX.
It is recommended that you do not change the default hostname to avoid problems with
the network connection. However, if you change the hostname, be sure to use a
unique name.
Parameters:
<Hostname>
Manual operation:
See
SYSTem:COMMunicate:NETWork[:COMMon]:WORKgroup
<Workgroup>
Sets an individual workgroup name for the R&S NRX.
Parameters:
<Workgroup>
SYSTem:COMMunicate:NETWork:MACaddress?
Queries the MAC address of the network adapter.
Usage:
Query only
SYSTem:COMMunicate:NETWork:RESTart
Restarts the network connection to the R&S NRX, i.e. terminates the connection and
sets it up again.
Usage:
Event
SYSTem:COMMunicate:NETWork:STATus?
Queries the network configuration state.
Usage:
Query only
System information and configuration
