Rohde & Schwarz 1424.7805K02, User Manual

Page: 269 / 530

Remote control commands
R&S
®
NRX
269 User Manual 1178.5566.02 ─ 09
<source_list> <expr>
For the parameter descriptions, see
Chapter 13.6.7.1, "Combin-
ing commands for burst average measurements" , on page 260.
Usage: Query only
13.6.8 Trace measurements
There are several ways to programm the R&S NRX for measurements. See Chap-
ter 13.4, "Making measurements" , on page 188.
Further information:
●
Chapter 6.4, "Trace" , on page 76
13.6.8.1 Combining commands for trace measurements
See also Chapter 13.4, "Making measurements" , on page 188.
Parameter list for trace measurements
Parameter Description
<scope_size> Mandatory. Number of test points on the time axis.
Corresponds to
[SENSe<Sensor>:]TRACe:POINts
on page 462.
<capture_time> Mandatory. Period within which measured data are captured in the trace
measurements.
Corresponds to
[SENSe<Sensor>:]TRACe:TIME
on page 216.
<source_list>
Mandatory. Primary and secondary sensor. The number for each sensor
is preceded by the character
@
. The entire expression is enclosed in
parentheses.
Example: (
@
3),(
@
2)
Sensor C is the primary sensor, and sensor B is the secondary sensor.
CONFigure<Measurement>:XTIMe[:POWer]? <scope_size>, <capture_time>,
<source_list>
FETCh<Measurement>:XTIMe[:POWer]? <scope_size>, <capture_time>,
<source_list>
READ<Measurement>:XTIMe[:POWer]? <scope_size>, <capture_time>,
<source_list>
MEASure<Measurement>:XTIMe[:POWer]? <scope_size>, <capture_time>,
<source_list>
Used to measure power over time.
Suffix:
<Measurement>
.
1 to 8
Measurement
Query parameters:
<scope_size> <expr>
Measurement settings and results