Operating concepts
R&S
®
NRX
43
User Manual 1178.5566.02 ─ 09
► To lift the restrictions indicated by :
a) Tap the touchscreen.
b) Enter the security password.
Further information:
●
"Security Password to Unlock Settings"
4.2
Remote operation
VNC (virtual network computing) simulates the user interface of the R&S NRX. Thus,
you can operate the R&S NRX manually from an external computer in the same way
as operating the R&S NRX itself. During VNC operation, local operation (manual oper-
ation, see
Chapter 4.1, "Manual operation"
on page 33) and remote operation have
equal access rights. Both users see the same screen contents of the R&S NRX and
can operate the R&S NRX simultaneously.
By default, VNC access is enabled. Any user in the network who knows the password
and IP address of the R&S NRX can access the R&S NRX. To prevent access, disable
the VNC server service under
Prerequisites
●
LAN interface of the external computer is configured for the network.
●
R&S NRX and the computer are connected using a LAN network.
To set up a connection using a VNC viewer
1. On the external computer, install the VNC viewer if it is not installed already.
2. Open the VNC viewer.
3. Enter the host name or the IP address of the R&S NRX.
4. Click "Connect".
5. Enter the session password.
For preconfigured password, see
To set up a connection using a web browser
1. Open the web browser.
2. Enter as web address:
http://<hostname>
or
http://<IP address>
. For example,
http://nrx-104711
.
3. Enter the password.
For preconfigured password, see
Remote operation
