Rohde & Schwarz 1424.7805K02, User Manual

Page: 158 / 530

System settings
R&S
®
NRX
158 User Manual 1178.5566.02 ─ 09
Security Password to Unlock Settings ← General tab
Enter the password that is required to enable the settings protected by a security pass-
word. When you leave the "Security" dialog, the settings are disabled automatically.
For preconfigured value and further information, see "Security Password tab"
on page 161.
USB Storage ← General tab
Enables or disables the file transfer via USB storage.
Volatile Mode ← General tab
If enabled, the R&S NRX does not save changed settings in the non-volatile memory.
After a reboot, the R&S NRX has the same configuration as at the time when you
enabled the volatile mode.
Use the volatile mode if you want to reboot with a defined configuration for a measure-
ment setup, regardless off any settings made manually or by remote control.
Enabling the volatile mode requires the security password. If you change into the vola-
tile mode or back, a reboot is required.
Sanitize ← General tab
Sanitizes the internal memory. Sanitization requires the security password. For details,
see the
Chapter 2.1.3, "Instrument security procedures" , on page 15.
User Interface ← General tab
Opens a dialog to restrict the manual and remote operation allowed at the R&S NRX.
See also
Chapter 4, "Operating concepts" , on page 33.
To lift the restrictions indicated by , tap the touchscreen and enter the security pass-
word. See also
"Security Password to Unlock Settings" on page 158.
"Enabled" Enables manual operation. The screen and all manual controls are
working. Remote operation is also enabled.
Instrument info