Rohde & Schwarz 1424.7805K02, User Manual

Page: 44 / 530

Operating concepts
R&S
®
NRX
44 User Manual 1178.5566.02 ─ 09
Operating the front panel keys
You can operate the front panel keys using shortcuts, see Table 4-3 .
In the web browser, you can use also the buttons below the measurement dialog that
visualize the front panel keys.
Table 4-3: Shortcuts for the front panel keys
Front panel key Remote operation replacement
[1 Trig] Backspace
[Esc] ESC
Favorites
Ctrl + C
[Freq] Ctrl + F
Screenshot
Ctrl + Y
[Preset] Ctrl + P
[System] Ctrl + E
[Zero] Ctrl + N
4.3 Remote control
The R&S NRX is equipped with various interfaces for connecting it to a controller for
remote control:
●
IEC/IEEE bus interface (standard equipment) in line with the standards IEC
60625.1 (IEEE 488.1) and IEC 60625.2 (IEEE 488.2)
●
Gigabit Ethernet interface
●
USB 2.0 interface for remote control and firmware update
Connectors are installed at the rear of the R&S NRX. See Chapter 3.2, "Instrument
tour" , on page 25.
The interfaces support the SCPI (standard commands for programmable instruments)
standard, version 1999.0 of May 1999. The SCPI standard is based on the IEEE 488.2
standard. It defines a standardized command language for controlling measuring and
test instruments with functions beyond the scope of the IEEE 488.2 standard.
For a detailed description of the remote commands, see Chapter 13, "Remote control
commands" , on page 178.
4.3.1 Switching to remote control (REMOTE)
Prerequisites
●
A link is established between the controller and the R&S NRX.
●
The R&S NRX is configured correctly.
Remote control