Remote control commands
R&S
®
NRX
395
User Manual 1178.5566.02 ─ 09
MEMory:FREE[:ALL]?
Queries the used and remaining disk space for setups and frequency-dependent cor-
rection tables. Combines the information queried by:
●
●
Example:
MEM:FREE?
Query
1358442496,8337394
Response
Usage:
Query only
MEMory:NSTates?
Queries the number of available setups.
Example:
MEM:NST?
Query
20
Response
Usage:
Query only
MEMory:STATe:CATalog?
Queries the names of the available setups stored on the R&S NRX.
Usage:
Query only
MEMory:STATe:DEFine
<register_name>[, <register_number>]
MEMory:STATe:MAP
<register_name>[, <register_number>]
Assigns a name to the setup stored in the memory location.
Take care to use recognizable names. The R&S NRX does not check whether a name
is unique. If you want to reset the factory default, use
.
The query returns the memory location that is assigned to the setup name.
Parameters:
<register_name>
Setup name; allowed are alphanumeric characters and special
characters.
<register_number>
Memory location of the setup
0
Factory-set setup, cannot be changed
1 to 19
Available memory locations
Example:
MEM:STAT:MAP "test",5
Managing setups and correction tables
