Rohde & Schwarz 1424.7805K02, User Manual

Page: 52 / 530

Measurement and display configuration
R&S
®
NRX
52 User Manual 1178.5566.02 ─ 09
6 Measurement and display configuration
The different measurement types and their specific configuration settings are described
in the following. Settings available for all measurements are described in
Chapter 6.1,
"Configuration for all measurement types" , on page 52.
● Configuration for all measurement types ................................................................ 52
● Continuous average ................................................................................................72
● Burst average ..........................................................................................................74
● Trace ....................................................................................................................... 76
● Pulse analysis ......................................................................................................... 81
● Time gate ................................................................................................................ 90
● Timeslot ...................................................................................................................95
● Statistics ................................................................................................................101
● NRT .......................................................................................................................108
6.1 Configuration for all measurement types
The main measurement dialog offers access to all measurement settings. The layout of
the dialog and how to open is are described in
Chapter 4.1.2, "Main measurement dia-
log" , on page 34.
In the navigation pane, you can directly set the unit and the resolution for numeric
results. These settings are also available under "Display".
The settings available for all measurements are described in the following, while mea-
surement-specific settings are separately for each measurement.
6.1.1 Display settings
Access: Main measurement dialog > "Display"
The available display settings depend on the measurement type and whether the result
display is numeric or graphical:
●
Resolution and unit of a measurement
●
Graphical or numerical display of measured values
●
Scaling parameters for graphical display
The statistics measurement has no "Display" settings, but you can scale the display.
Configuration for all measurement types