Rohde & Schwarz 1424.7805K02, User Manual

Page: 34 / 530

Operating concepts
R&S
®
NRX
34 User Manual 1178.5566.02 ─ 09
1
2
3 4 5 6 7
Figure 4-1: Start dialog (example for setup with one power sensor)
1 = Measurement pane
2 = Connected sensors
3 = Miniature display layout. See
Chapter 4.1.5, "Selecting the display layout" , on page 38.
4 = Title
5 = Measurement type
6 = Status information. See
Chapter 4.1.3, "Status information" , on page 36.
7 = Notification center status. See Chapter 4.1.4, "Notification center" , on page 37.
In the measurement pane, the settings, results and status of the active measurements
are displayed. The layout depends on the selected display layout. See
Chapter 4.1.5,
"Selecting the display layout" , on page 38.
4.1.2 Main measurement dialog
From the start dialog, you can access the measurements.
To access a measurement
► In the start dialog, tap the pane of the measurement you want to access. In this
example, tap (7) in Figure 4-1 .
The selected measurement is displayed in full screen. Its number is highlighted in
the miniature display layout in the upper left corner.
Manual operation