Ricoh LP1136n Manual Download Page 212

Page: 212 / 574

Printer Language:

RPCS, PCL 5e/6, PostScript Level 3, PDF

Fonts:

PCL 5e/6

• Monotype Imaging 35 Intellifonts, 10 TrueType fonts, 13 International fonts, and 1 Bitmap font.

PostScript 3, PDF

• 136 fonts (Type 2:24, Type 14:112)

• If the printer has not been used for a while, there may be a short delay before the first page starts

printing.

• Continuous printing on sheets with a width of 170 mm or smaller may decrease the printing speed

depending on the temperature control of the fusing unit.

Options

Paper Feed Unit TK1030

Dimensions (W × D × H):

388 × 486 × 155 mm (15.3 × 19.1 × 5.3 inches)
(Without pins on the unit)

Paper size:

See p.75 "Paper and Other Media Supported by This Printer".

Paper weight:

60 - 130 g/m

(17 - 34 lb.)

• Specifications are subject to change without notice.

Envelope Feeder Type 400

Dimensions (W×D×H):

359.4 × 427 × 101 mm (14.15 × 16.8 × 3.98 inches)

Paper Weight:

72 - 90 g/m

(19 - 24 lb.)

11. Appendix

192

Summary of Contents for LP1136n



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LP1136n

Reviews:

Related manuals for LP1136n

Brands by name

Popular brands

Ricoh LP1136n, Manual

Search results

Summary of Contents for LP1136n

Reviews:

Related manuals for LP1136n

Brands by name

Popular brands