Ricoh LP1136n Manual Download Page 165

Page: 165 / 574

9. Troubleshooting

Error & Status Messages on the Control Panel

This section describes the main messages that appear on the display. If a message that is not described
here, follow its instructions.

Status Messages

Ready

This is the default ready message. The machine is ready for use. No action is required.

Processing...

The machine is printing. Wait a while.

Waiting...

The machine is waiting for the next data to print. Wait a while.

Offline

The machine is offline. To start printing, switch the machine to online by pressing the [Online] key on the
control panel.

Warming up...

The printer is warming up or toner is being supplied. Wait until "Ready" appears on the display.

Resetting Job...

The machine is resetting the print job. Wait until "Ready" appears on the display.

Setting change in process

The machine is changing settings. Wait a while.

Suspending...

All jobs in the machine are suspended. Wait a while.

Hex Dump Mode

In the hex dump mode, the machine receives data in hexadecimal format. Turn off the machine after printing,
and then turn back on.

Messages (in alphabetical order)

Call Service: EC Power Off On/Call Service if error reoccurs

A communication error was sent from the engine to the controller.

• Turn the power off, and then on. If the message appears again, contact your sales or service

representative.

145

Summary of Contents for LP1136n



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LP1136n

Reviews:

Related manuals for LP1136n

Brands by name

Popular brands

Ricoh LP1136n, Manual

Search results

Summary of Contents for LP1136n

Reviews:

Related manuals for LP1136n

Brands by name

Popular brands