Ricoh LP1136n, Manual

Page: 425 / 574

• If many types of interface are installed, configure the interface that communicates with linklocal
address.
• If the connected computer's IP address is a link local address specified by the DHCP's Autonet,
and multiple interfaces are connected to the printer, you can select an interface to communicate
through.
• If you do not specify an interface, the Ethernet interface is automatically selected.
• wlan can be specified only when the IEEE 802.11b interface unit is installed.
Interface Interface configured
ether Ethernet interface
wlan IEEE 802.11b interface
Selecting the IPP port number
msh> bonjour ippport {ipp | ssl}
• Appears when SSL is enabled.
• If the "ipp" is selected, the port number is set to "631". If the "ssl" is selected, the port number is
set to "443".
devicename
Use the "devicename" command to display and change the printer name.
View settings
msh> devicename
Printer name configuration
msh> devicename name "string"
• Enter a printer name using up to 31 alphanumeric characters.
• Set single names for each printer.
Printer name initialization
msh> devicename clearname
• Reset the printer name to its default.
dhcp
Use the "dhcp" command to configure DHCP settings.
Remote Maintenance by telnet
201
6