Ricoh LP1136n Manual Download Page 169

Page: 169 / 574

Proxy User Name/Password error

Proxy user name and password are incorrect.

• Change the current user name and password to the correct user name and password.

RC Gate connection error

The printer cannot communicate with Remote Communication Gate.

• Contact your sales or service representative.

Remove Misfeed Duplex Unit/Open Duplex Unit Cover

Paper is jammed in the duplex unit.

• Remove and re-install the duplex unit. Remove any jammed paper from the duplex unit and under the

rear cover.

• See p.167 "Removing Misfed Paper".

Remove Misfeed Internal Path/Open Front Cover

Paper is jammed in the internal paper feed path.

• Open the front cover and remove jammed paper.
• See p.167 "Removing Misfed Paper".

Remove Misfeed Paper Tray/Pull out Tray

Paper is jammed in the specified input paper tray.

• Remove paper from the input paper tray and then reload paper. Then open the front cover and then

close it again, so the error message disappears.

• See p.167 "Removing Misfed Paper".

Remove Misfeed Paper Exit Cover/Open Paper Exit Cover

Paper is jammed under the paper exit cover.

• Open the front and rear cover and remove jammed paper.
• See p.167 "Removing Misfed Paper".

Remove Paper Standard Tray

The standard output tray is full.

• Remove the paper from the standard output tray.

Replace Print Cartridge

It is time to replace the waste toner.
The printer is out of toner.

• Replace the toner cartridge.
• See p.107 "Replacing the Toner Cartridge (Print Cartridge)".

Error & Status Messages on the Control Panel

149

Summary of Contents for LP1136n



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LP1136n

Reviews:

Related manuals for LP1136n

Brands by name

Popular brands

Ricoh LP1136n, Manual

Search results

Summary of Contents for LP1136n

Reviews:

Related manuals for LP1136n

Brands by name

Popular brands