Ricoh LP1136n Manual Download Page 266

Page: 266 / 574

Click [LPR Port] in [Create a new Port], and then click [Next >].

Enter the printer's IP address in the [Name or address of server providing lpd] box.

10.

Enter "lp" in the [Name of printer or print queue on that server] box, and then click [OK].

11.

Check that the name of the printer whose driver you want to install is selected, and then click
[Next >].

12.

Change the printer name if you want, and then click [Next >].

Select the [Yes] check box to configure the printer as default.

13.

Click [Next >].

14.

Specify whether or not to print a test page, and then click [Next >].

15.

Click [Finish].

The printer driver installation starts.

• Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on

the CD-ROM root directory.

• The printer driver with the selected language will be installed. The English printer driver is installed

when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.

• A User Code can be set after the printer driver installation. For information about User Code, see the

printer driver Help.

1. Preparing for Printing

Summary of Contents for LP1136n



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LP1136n

Reviews:

Related manuals for LP1136n

Brands by name

Popular brands

Ricoh LP1136n, Manual

Search results

Summary of Contents for LP1136n

Reviews:

Related manuals for LP1136n

Brands by name

Popular brands