Ricoh LP1136n, Manual

Page: 433 / 574

After configuring the settings, the following message appears:
User configuration changed.
ipv6
Use the "ipv6" command to display and configure IPv6 settings.
View Setting
msh> ipv6
IPv6 stateless address
msh> ipv6 stateless {on|off}
• If "on" is selected, IPv6 requests information required for maintaining stateful connection to the
router for as long as the printer power is turned on. This setting allows information from the router
to be obtained constantly, and periodically refreshes the effective period of the stateless address.
lpr
Use the "lpr" command to view and configure LPR settings.
View Setting
msh> lpr
Checking host name when deleting the job
msh> lpr chkhost {on|off}
• If "on" is selected, you can delete print jobs only from the IP address of the host that sent the print
job. If LPR is disabled, you can also delete print jobs sent from the IP addresses other than that
of the host.
netware
Use the "netware" command to configure the NetWare settings such as the print server name or file server
name.
Netware Printer Server Names
msh> netware pname "character string"
• Enter the NetWare print server name using up to 47 characters.
Netware File Server Names
msh> netware fname
• Enter the NetWare file server name using up to 47 characters.
Remote Maintenance by telnet
209
6