Rhymebus RM6F5 series, Operation Manual

Page: 50 / 195

Chapter 3 The Setting of Keypad
50
3
Display 7 Setting pressure and actual pressure
SV
KEYPAD
PV
Running
Display 8 Actual flow
SV
KEYPAD
PV
Running
a. Select one of eight displays as the main display in accordance with the table of
from F_006 (Selection of Main Display).
b. Determine one of eight displays as the main display according to the application.
When the parameter of function is completed without pressing
PROG
key, the drive
will automatically switch back to the main display after 3 minute.
c. The significance of seven-segment displays of Display 6 (Terminal status and heat
sink temperature) is shown as below figure.
X4
X3
REV
X1
Y2
Y1
Ta2
Ta1/Tb1
X2
FWD
Heat sink
temperature
Left Display Right Display
*grey-color digit in above figure means blinking
Right display: The temperature of heat sink.
Left display:
1.Blinking number
―6‖: Indicate the Display 6
2.Horizontal line of seven-segment displays: X1~X4, FWD, REV terminals
Vertical line of seven-segment displays: Y1, Y2, Ta1, Tb1, Ta2 terminals
The significance of seven-segment displays
Display Terminal Description Display Terminal Description
FWD
FWD
terminal is
active
X4
X4 terminal is
active
REV
REV
terminal is
active
Ta1,Tb1
Ta1,Tb1
terminal is
active
X1
X1 terminal
is active
Ta2
Ta2 terminal is
active
X2
X2 terminal
is active
Y1
Y1 terminal is
active
X3
X3 terminal
is active
Y2
Y2 terminal is
active