Rhymebus RM6F5 series, Operation Manual

Page: 81 / 195

Chapter 5 Parameter Setting Description
81
5
d.
The ―holding command‖ is disabled when STOP command is activated.
※
STOP command:
(I)
When F_001 set 0 or 2, ―FWD‖ and ―REV‖ terminals are simultaneously
short-circuit or open-circuit.
(II) When F_001 set 1,
―FWD‖ terminal is open-circuit.
(III)
When F_003 set 1, pressing the ―
OFF
RESET
‖ key.
(IV)
Press the ―
OFF
RESET
‖ key when start command by keypad.
e. Set the S-curve function depend on the application to buffer the impact during start,
stop, acceleration and deceleration.
EX: To buffer the impact when the object fall on the conveyor line or the running of
elevator.
Frequency
command
Time
Output
frequency
S-curve time
S-curve time S-curve time
S-curve time