Rhymebus RM6F5 series, Operation Manual

Page: 53 / 195

Chapter 3 The Setting of Keypad
53
3
※
Do Not execute the copy for different software version, otherwise the
parameters will occur error and the keypad will display
message
.
a-3: ( Parameter Copy: Master

Slaves)
Except for two methods described above a1 and a2,
It also can use the operation panel of lead drive, through the control wire copy
parameter to other auxiliary drive. It allows parameter settings to be easily
copied from the drive
Operation steps Display
1. Through the indicator of lead drive (KEAYPAD)
to distinguish location of lead drive. When the
indicator becomes brighter ,and the inverter
represent for the lead drive.
SV
KEYPAD
PV
Running
2. Press
PROG
key to enter function setting mode.
SV
KEYPAD
PV
Running
3. Press or key to select the function to
F_194 (Default Setting) and then press FUN
DATA
key to
enter parameter setting mode.
SV
KEYPAD
PV
Running
4. Press key to select and then
press
FUN
DATA
key to copy the parameters.
SV
KEYPAD
PV
Running
5. After completing the copy, the keypad will display
message and automatically back to
function setting mode.
SV
KEYPAD
PV
Running
※
When using copy parameter function, please note F_015
、
F_016
、
F_091 parameter content can
’t copy to the slave.
b. Restore Default Value:
RM6F5 series drive provide 5 default values for using. User can according to
the demand to restore default values.
(Restore the default value of drive for 60Hz)
(Restore the default value of single pump constant pressure control
application with 60Hz power source)
(Restore the default value of multi-pump constant pressure control
application with 60Hz power source)
(Restore the default value of single pump constant pressure control
application with 50Hz power source)
(Restore the default value of multi-pump constant pressure control
(S-mode)application with 60Hz power source)