Rhymebus RM6F5 series, Operation Manual

Page: 47 / 195

Chapter 3 The Setting of Keypad
47
3
Running
3-1-2 Keys of Keypad
Symbol Name Description
PROG Function key
1.Enter the function setting mode
2.Back to the monitor mode
FUN
DATA
Function/
Parameter key
1.Enter the parameter setting mode
2.Back to the function setting mode
3.Switch the monitor mode
HAND
ON
Manual control
key
Starting inverter to enter manual control
mode.( Auto constant pressure control)
UP key
Change functions and parameters
DOWN key
AUTO
ON
Auto constant
pressure control
Starting the inverter to auto constant
pressure mode.
OFF
RESET
Off/Reset key
1.Drive stops (Cut off the output signal of
U/T1,V/T2,W/T3 terminals)
2.Error reset.
Note:

KP-605 cables: Only used with 8-pin telephone cable (flat) or Cat.5e cable (AMP)

8-pin telephone cable: The cable length must be within 5 meters.

Compared Cat. 5e cable (AMP): The cable length can be over 5 meters (the longest length is
100 meters)
PROG key
FUN/DATA key
HAND ON key
Operation key
UP/Down key
AUTO ON key
OFF/RESET key
POT knob