![background image](http://html1.mh-extra.com/html/omron/cx-simulator-1-9/cx-simulator-1-9_operation-manual_744207107.webp)
System Status Setting Window
Section
3-7
68
3-7-6 PLC Operation Settings
The [PLC Operation Settings] window allows to set for PLC operation.
1,2,3…
1. Selecting [PLC Operation Settings] in the [System Status Setting] | [Set-
tings] menu will display [PLC Operation Settings] window.
•
Replay from the top of the
same scan after online…
Set whether or not to enable online edit when
Scan Replay/Step Run.
•
Disable Cycle time
watching
Disable the watchdog timer (WDT). The Watch
Cycle Time in the PLC Setup and the WDT
instruction setting are disabled. When disabled,
a CPU error will not occur even if the cycle time
exceeds the setting.
•
DIP Switch Settings
Set the equivalent setting to the DIP switches of
the CPU Unit.
•
UM Automatic Boot
Set to read Autoexec file automatically when
the power turns ON (When the Ladder Engine
is started.).
•
User Switch
Set the DIP Switch (A39512) for
User-customization.
•
OK
Save the current settings and exit the window.
•
Cancel
Discard the current settings and exit the win-
dow.
2. Click the [OK] button when setting is completed.
Summary of Contents for CX-Simulator 1.9
