![background image](http://html1.mh-extra.com/html/omron/cx-simulator-1-9/cx-simulator-1-9_operation-manual_744207023.webp)
xxiv
Troubleshooting Problems with Unit Versions on the CX-Programmer
Problem Cause
Solution
After the above message is displayed, a compiling
error will be displayed on the
Compile
Tab Page in
the Output Window.
An attempt was made to
download a program containing
instructions supported only by
later unit versions or a CPU Unit
to a previous unit version.
Check the program or change
to a CPU Unit with a later unit
version.
An attempt was to download a
PLC Setup containing settings
supported only by later unit ver-
sions or a CPU Unit to a previous
unit version.
Check the settings in the PLC
Setup or change to a CPU
Unit with a later unit version.
"????" is displayed in a program transferred from the
PLC to the CX-Programmer.
An attempt was made to upload a
program containing instructions
supported only by higher ver-
sions of CX-Programmer to a
lower version.
New instructions cannot be
uploaded to lower versions of
CX-Programmer. Use a higher
version of CX-Programmer.
Summary of Contents for CX-Simulator 1.9
