![background image](http://html1.mh-extra.com/html/omron/cx-simulator-1-9/cx-simulator-1-9_operation-manual_744207046.webp)
What Is the CX-Simulator?
Section 1-1
7
Item Actual
PLC CX-Simulator
Program mode
Stop
Monitor mode and Run
mode
Continuous execution of scan
Minimum Cycle Time
Logical cycle time: Substitute cycle time for
set value.
Actual cycle time: Regulate actual execution
time of one cycle on the computer.
Scan Run (only one scan)
Continuous Scan Run (one scan at regular
intervals)
Step Run (only one step)
Continuous Step Run (repeat address exe-
cution at regular intervals)
Block Run (Start point, break point, and I/O
break conditions can be set.)
None
Scan Replay (Return to the start point of the
scan when pausing.)
Operating mode
Operation when power
turns ON
Reset
I/O memory ar-
eas
Available Available
I/O area alloca-
tion
Required
PLC unit registration instead (No slot set-
ting)
I/O refresh
Available
None (Only for cycle time calculation. Con-
troller Link Unit, Ethernet Unit, and Serial
Communications Board/Unit performs virtual
operation.)
Peripheral ser-
vicing
Available
None (Only for cycle time calculation. Con-
troller Link Unit, Ethernet Unit, and Serial
Communications Board/Unit performs virtual
operation.)
External input
Available
Generate virtual external input by one of the
followings.
•
Overwrite I/O memory areas using the
debugging program.
•
Issue FINS commands using the com-
mand log and the Data Replay Tool.
•
Issue FINS commands using the data
trace file and the Data Replay Tool.
•
Issue FINS commands using the data
replay file and the Data Replay Tool.
•
Overwrite I/O memory areas using the
I/O Conditions Tool.
Cycle time
Virtual cycle time: Estimated cycle time if
operated on the actual CS/CJ/CP-series
CPU (Application program)
Computer cycle time: Actual cycle time on
the computer (Application p de-
bugging program)
PLC setup
Available
Available
CPU Unit basic
functions
DIP switch set-
ting
Available
Available (By software, some functions only)
Summary of Contents for CX-Simulator 1.9
