![background image](http://html1.mh-extra.com/html/omron/cx-simulator-1-9/cx-simulator-1-9_operation-manual_744207191.webp)
Connection with Application Programs
Section 7-2
152
•
If the FINS address set by the application program can not be changed,
[Disconnect the Simulator] and then change the node address of the network
communications unit in the [System Status] | [Settings] | [Network Commu-
nications Settings] window.
Note
The CX-Simulator generates a FINS network address automatically when
[Connect]. Use the FINS network address displayed when [Connect] as that to
be used by the application program.
•
If multiple networks exist, the routing table for FinsGateway must be
changed. For instructions on changing the routing tables, refer to
Section 3
of the
CX-Integrator Operation Manual
(W445).
4. Turn the Run mode of the Ladder Engine to [Continuous Run] in the
[CX-Simulator Debug Console] window.
5. Execute the application program to check its operation.
Note
When changing the contents of I/O memory areas of the Ladder Engine for
debugging application programs, use the CX-Programmer.
Summary of Contents for CX-Simulator 1.9
