![background image](http://html1.mh-extra.com/html/omron/cx-simulator-1-9/cx-simulator-1-9_operation-manual_744207021.webp)
xxii
Unit Versions and Programming Devices
The following tables show the relationship between unit versions and
CX-Programmer versions.
Unit Versions of CS/CJ-series CPU Units and Programming Devices
CX-Programmer
CPU Unit
Functions
Ver. 3.3
Ver. 4.0
Ver. 5.0
Ver. 6.0
Ver. 7.0
Ver. 7.2
or
higher
Using new
functions
--- --- --- OK
(See
note 1.)
OK
(See note
1.)
CS/CJ Series,
unit version
4.0
Functions added
for unit version
4.0
Not using new
functions
OK OK OK OK OK
Using new
functions
--- --- OK OK OK
CS/CJ Series,
unit version
3.0
Functions added
for unit version
3.0
Not using new
functions
OK OK OK OK OK
Using new
functions
--- OK OK OK OK
CS/CJ Series,
unit version
2.0
Functions added
for unit version
2.0
Not using new
functions
OK OK OK OK OK
Using new
functions
CS1D CPU
Units for Sin-
gle-CPU Sys-
tems, unit ver-
sion 2.0
Functions added
for unit version
2.0
Not using new
functions
--- OK OK OK OK
Using new
functions
--- OK OK OK OK
CS1D CPU
Units for Du-
plex-CPU
Systems, unit
version 1.
Functions added
for unit version
1.1
Not using new
functions
OK OK OK OK OK
Note 1:
As shown above, there is no need to upgrade the CX-Programmer ver-
sion as long as the functions added newer unit versions are not used.
2:
CX-Programmer version 7.0 or higher is required to use functions added
for unit version 4.0. Additional functions are supported if CX-Programmer
version 7.2 or higher is used.
Unit Versions of CP-series CPU Units and Programming Devices
CX-Programmer version
CPU Unit
Model
Unit
version
Ver. 6.11
Ver. 6.20
Ver. 7.11
or higher
Programming Console
CP1H-X
@@@@
-
@
Ver.
1.1
OK OK OK
CP1H-XA
@@@@
-
@
Ver.
1.0
OK OK OK
CP1H CPU Units
CP1H-Y
@@@@
-
@
Ver. 1.1
---
OK
OK
CP1L-M
@@@@
-
@
CP1L CPU Units
CP1L-L
@@@@
-
@
Ver. 1.0
---
---
OK
Cannot be used.
Note 1:
As shown above, there is no need to upgrade the CX-Programmer ver-
sion as long as the functions added newer unit versions are not used.
2:
CX-Programmer version 7.0 or higher is required to use functions added
for unit version 4.0. Additional functions are supported if CX-Programmer
version 7.2 or higher is used.
Summary of Contents for CX-Simulator 1.9
