![background image](http://html1.mh-extra.com/html/omron/cx-simulator-1-9/cx-simulator-1-9_operation-manual_744207150.webp)
Step Run and Break
Section 4-3
111
I/O Break Condition
The I/O break condition is expressed with the following elements for both I/O
Condition and Word Condition.
<Target I/O memory area >(<Condition operator >)(<Value >)
Element Content
Target I/O memory area Specify the target I/O memory area in its type and
address.
Condition operator
For Word Condition, a condition operator exists.
Value
For I/O Condition, set ON/OFF/NOT, for Word Con-
dition the fixed value (BIN), and for NOT operator of
Word Condition nothing.
Condition operators (and values for I/O Condition) to be set are shown below.
I/O Condition Value
Contents
ON
The bit value is ON(1)
OFF
The bit value is OFF(0)
NOT
Hold if the value is changed.
Word Condition
Operator
Contents
=
Hold if the value is the same as that of the target I/O
memory area.
<
Hold if the value is smaller than that of the target I/O
memory area.
>
Hold if the value is greater than that of the target I/O
memory area.
<=
Hold if the value is equal to or smaller than that of the
target I/O memory area.
>=
Hold if the value is equal to or greater than that of the
target I/O memory area.
<>
Hold if the value is not equal to that of the target I/O
memory area.
NOT
Hold if the value has been changed.
Summary of Contents for CX-Simulator 1.9
