![background image](http://html1.mh-extra.com/html/omron/cx-simulator-1-9/cx-simulator-1-9_operation-manual_744207281.webp)
Error Processing
Section 10-1
242
10-1-3 I/O Condition Tool
If an error occurs while operating the I/O Condition Tool, the error contents will
be displayed in the dialog box. Remove the error causes referring to the
remedies.
Symptoms Causes
Remedies
Communication error (received
an error response).
Wrong address
specification or
range of I/O
memory for I/O
conditions or
wrong communi-
cations environ-
ment.
1. Check the I/O conditions settings.
2. Exit executing application programs excluding the
CX-Simulator and try again.
Communications error (commu-
nications timeout).
A timeout oc-
curred in a re-
sponse from the
Ladder Engine.
1. If the cycle time of the Ladder Engine is too long,
use synchronous processing in the virtual cycle
time.
2. Check if the target FINS address is the same as
that of the Ladder Engine.
Failed to get the current IOM.
Wrong address
specification or
range of I/O
memory for I/O
conditions.
Check the I/O conditions settings.
File format is invalid.
The specified
execution file has
an invalid format.
Specify the I/O condition file, which has a different file
format from a Data Replay file.
I/O Condition file exceeds the
limit of maximum lines.
Change the registered conditions or create another
execution file.
I/O Condition file exceeds the
limit of maximum lines. The
maximum limit is -- lines
Change the registered conditions or create another
execution file.
I/O Condition to watch does not
exist.
Check the I/O conditions settings and if "D2" is set in
the execution column.
The data in the clipboard is not
the I/O condition format. Invalid
lines have been deleted.
Copy the I/O condition expression of correct format to
the clipboard and try again.
The lines with invalid I/O condi-
tion format have been deleted.
Wrong format for
I/O conditions.
Check the I/O conditions settings.
Summary of Contents for CX-Simulator 1.9
