OmniTek OTR 1001, User Manual

Page: 166 / 390

OmniTek OTR 1001 User Guide, v3.1 J-4
Lower Part of the Event Log
Note: To switch between the following displays: Take the View option on the Button Bar.
(This cycles through the available displays.)
Event List
Figure J-3: Sample Event List
The Event List is a simple historical listing of the events that have been detected. To scroll
through the list, twist the VERT knob or drag the scroll bar with a mouse.
The events that are listed are all ones for which the Show in Log option is ticked on the Video
Config and Audio Config pages of the Config window at the time the log is recorded.
To minimise the number of entries shown, events are shown as starting on one particular frame
then stopping on another, rather than each occurrence getting an individual entry.
The information that may be displayed includes:
The type of transition:
Start The named event started and continued for every frame
End The named event had been occurring on every frame, but stopped at this point.
Change The named event only occurred on this frame.
Details of the service being analysed (Service ID and Subchannel Index)
The name and ID of the Status parameter giving rise to the event
Additional descriptive information (where applicable), such as the number of frames
between the start and the end of the named event
Timing information – taken either from embedded timecodes (where available) or from
the system’s own clock
A maximum of 500 events can be scrolled through at any one time. This limits the Live log to
the most recent 500 entries. Session logs can however be longer than this. Where the Session log
contains more than 500 entries, the Event List is divided into pages of 500 entries which can be
stepped between using the
Next page and Previous page options on the Button Bar.