OmniTek OTR 1001, User Manual

Page: 140 / 390

OmniTek OTR 1001 User Guide, v3.1 I-16
Real World Projection
Figure I-13: Example Real World Projection.
The Real World Projection allows the current scene to be seen from all different angles.
The framework for the display comprises four lines emanating from a point representing the
viewer’s position, plus a set of planes representing the Depth Budget minimum (in red), the
screen plane (outlined in white) and the Depth Budget maximum (in violet). The pixels for
which depths have been calculated are slotted into this framework, giving the required Real
World Projection.
The basic framework can be rotated both left to right and up & down, thereby allowing the scene
to be seen from all possible angles. You can also move in and out on the images. For details, see
‘Rotate/Zoom’ below.
The OTR also offers a sequence of standard views which can be viewed in turn by taking the
Next View option on the Button Bar (or in the Properties control).
Selection
The Depth Plan is one of the views offered within the Picture category.
Control Panel Mouse & Keyboard
To display the Depth Plan :
1. Press the PICT tile button until the Depth
Plan appears 2. Select 3D Depth Plan from the Picture
section of the View Tile Browser.
(For more detailed instructions, see Section E.1.)
3. Use the Display Type button on the Button Bar to select the required form of Depth Plan.
Configuration Issues
See Section I.4.