manualshive.com logo in svg

OmniTek OTR 1001, User Manual

Share
Download
OmniTek OTR 1001 User Manual Download Page 102

 

 

OmniTek OTR 1001 User Guide, v3.1 

F-6 

Displaying Timecodes 

The option to display the timecode is offered as part of the Picture properties, along with various 
choices about the size and position of the timecode on the display. 

 

Figure F-5: 

Timecode overlay properties. 

 

Control Panel 

Mouse & Keyboard 

To select the type of timecode displayed:

 

1.

 

Call up the Properties control (e.g. by pressing the PROPS button) 

2.

 

Open the 

Picture

 tile section of the Properties control far enough to display the 

Timecode

 

details. 

3.

 

Select the 

Type

 entry and use the drop-down menu to select the type of timecode that is 

included in the video stream. 

Note:

 ATC timecodes are divided into separate ATC-VITC1, 

ATC-VITC2 and ATC_LTC types, according to the type of timecode they contain. 

To start/stop displaying timecodes:

 

Setting the timecode type automatically results in the timecode being displayed. Once 
displayed, it can then be switched on and off using the 

Timecode

 option on the Button Bar. 

 

 

 

Summary of Contents for OTR 1001







































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands