OmniTek OTR 1001, User Manual

Page: 164 / 390

OmniTek OTR 1001 User Guide, v3.1 J-2
Figure J-1: Sample Event Log display.
The display is divided into two areas. The upper area of the display is given over to a ‘Session
List’ of the logs that are currently available for inspection, together with any logging sessions
that have been set up but not yet completed. The lower area is used to display details of the log
that is selected in the upper part of the screen. This lower display may comprise either:
an historical ‘Event List’ (as shown above) or
a ‘Event Frequency tree’, giving an analysis of the frequency at which particular types of
event have occurred, or
a snapshot of the status at the start of the logging session, or
a snapshot of the status at the end of the logging session.
Further details of these displays are given below.
Note: If a scroll bar is shown at the bottom of the display, there are further columns of
information to be displayed. These can be brought into view with a mouse.
Selection
The Event Log is a member of the STATUS category.
Control Panel Mouse & Keyboard
To display the Event Log:
Press the STATUS tile button until the
Event Log display appears. Select Event Log from the STATUS
section of the View Tile Browser.
(For more detailed instructions, see Section E.1.)