OmniTek OTR 1001, User Manual

Page: 25 / 390

OmniTek OTR 1001 User Guide, v3.1a A-13
A.5 Installing Additional Software Options
The range of software options that are supported on any system is controlled through a set of
licences recorded in a licence file. When additional software options are purchased, the licence
file needs to be updated.
The procedure used is as follows. It is in two parts – one carried out at the time the additional
software options are purchased; the other carried out when the updated licence file is received
from OmniTek.
Note: Both parts of the operation copy files to or from a USB memory stick. There is no need to
formally unmount this stick at the end of the operation but, if required, Section U.2 describes a
procedure for unmounting the stick from within the OTR application.
Steps at time of purchase
Control Panel Mouse & Keyboard
1. Insert a memory stick in one of the USB ports on the OTR 1001.
2. Display the System page of the Config window.
3. Take the Save Licences option offered on
the Button Bar and use the file selector
that appears to save a copy of your current
licence file to the USB memory stick.
The use of this file selector is described in
Section B.6.
3. Take the Save Licences option offered on
the Button Bar and use the Windows file
selector that appears to save a copy of your
current licence file to the USB memory
stick.
4. Email a copy of this licence file to OmniTek/your OmniTek dealer as advised by your dealer.
Steps on receipt of the updated licence file
1. Copy the received licence file to a USB memory stick and insert this in one of the USB ports
on the OTR 1001.
2. Display the System page of the Config window.
3. Take the Load Licences option offered on the Button Bar and use the file selector this offers
to open new licence file.
4. Allow the system to shut down and restart.