OmniTek OTR 1001, User Manual

Page: 208 / 390

OmniTek OTR 1001 User Guide, v3.1a K-24
Information about the details displayed is given below, in the section on Audio Information
Displayed.
Selection
The Status View is one of the displays offered within the STATUS category.
Control Panel Mouse & Keyboard
To display the Status View:
Press the STATUS tile button until the
Status display appears. Select Status from the STATUS section of
the View Tile Browser.
(For more detailed instructions, see Section E.1.)
Configuration Issues
The following Configuration settings affect the Audio Status display:
Clip Level etc.
The conditions under which audio channels are reported as Clip, Over, Mute or Silence are set
on the
Audio Config page of the Config window. The Maximum True Peak level is also set on
that page. (See Section T.3)
Display Properties
The controls available over the display of the audio status information are the same as those over
the display of the video status information.
The aspect of the display that can be set through the Properties control (Control Panel: press
PROPS to display) is the width of the columns in which the Overview information is displayed.
These widths can also be adjusted by dragging with a mouse (where fitted).
Audio Information Displayed
The information shown for Embedded, AES or Surround Sound audio comprises the following
information. The category of Status Summary on which any parameter is shown in brackets.
(The rather more complex metadata associated with Dolby audio is described in Section L.)
The information shown is divided into information about channel pairs (including the currently-
selected downmix pair), which are then subdivided into information about individual channels.
Loudness Information (Audio)
Details are given for individual channels, channel pairs and surround sound groupings of
Momentary, Short-Term and Integrated Loudness values and Loudness Range (see Section K.4
above), together with running counts of the numbers of fields/frames in which the various
significant levels were exceeded. Loudness values for channel pairs and programme values
(where shown) have been calculated by applying the appropriate weighting to the separate
channel values.