OmniTek OTR 1001, User Manual

Page: 34 / 390

OmniTek OTR 1001 User Guide, v3.1 B-6
View Tile Browser
The View Tile Browser toolbar allows different analytical ‘Views’ of the
input to be selected for display. It is described in detail in Section C.2.
Presets Toolbar
Presets store particular combinations of settings and other selections, for easy recall on
subsequent occasions. There are separate presets for the View, Gen and Config windows, plus
‘System’ presets that implement specific combinations of configuration settings and window
layouts. See Section B.4 for further information.
Presets are identified by number – 1, 2, 3 etc. and the
Presets toolbar enables you to select the Preset you
want to use. Presets 1 – 9 are selected by simply
clicking with your mouse on the corresponding
number. To select Presets 10 and above, click on *,
click on the digits of the required number, then click
on Enter.
Properties
Properties controls such as the one shown here are used to
configure screen displays.
A separate Properties control is provided for each top-level
window, showing how that window and its contents are
currently configured and allowing that configuration to be
changed. Any changes that are made within the control have
immediate effect.
The window associated with any Properties control is
indicated in the title bar and in the tab at the bottom of the
display, which can also be used to select the required
display where the controls are overlapped as shown here.
Further information about Properties controls is given in
Section B.3.