OmniTek OTR 1001, User Manual

Page: 383 / 390

OmniTek OTR 1001 User Guide, v3.1 II-3
Example 4: Reading the name, current value and status of a Status Parameter
Note: A single generic procedure is used to read the above details of any Status Parameter. The
selection of the parameter to be read involves the setting of a range of parameters that identify
not just the parameter of interest but also the input channel and the service on that channel with
which the parameter is associated. The procedure is as follows:
1. Set the virtualChannelID parameter to the appropriate integer value (listed in the
SNMPCommandInfo.xml file). Confirm by using the corresponding Get command.
2. Set the serviceType parameter to the appropriate integer value (also listed in the
SNMPCommandInfo.xml file). Confirm by using the corresponding Get command.
3. Set the subChannelID parameter to the appropriate index value for the instance of this
service you require information about (see the SNMPCommandInfo.xml file). Confirm
by using the corresponding Get command.
4. Set the statusParameterID parameter to the appropriate integer value (see the
SNMPCommandInfo.xml file). Confirm by using the corresponding Get command.
5. Set the statusParameterIndex parameter to the appropriate integer value (also listed in
the SNMPCommandInfo.xml file). Confirm by using the corresponding Get command.
6. Set the statusParameterOptionType parameter to the appropriate integer value (also
listed in the SNMPCommandInfo.xml file). Confirm by using the corresponding Get
command.
7.
To read the parameter’s name
, get the statusParameterName parameter.
To read the current value of the parameter , get the statusParameterDataValue
parameter.
To read the current value interpreted as a string , get the statusParameter parameter.
To read the current ‘Alert Level’ (Error, Warning, OK etc.) of the parameter
, get the
statusParameterAlertLevel parameter.
Example 5: Reading the name and/or SMPTE 352 ID of the Incoming Video Standard
1. Set the virtualChannelID parameter to the appropriate integer value (listed in the
SNMPCommandInfo.xml file). Confirm by using the corresponding Get command.
2. Set the serviceType parameter to 0. Confirm by using the corresponding Get command.
3. Set the subChannelID parameter to 0. Confirm by using the corresponding Get
command.
4. Set the statusParameterID parameter to 32 (Video/Format). Confirm by using the
corresponding Get command.
5. Set the statusParameterIndex parameter to 0. Confirm by using the corresponding Get
command.
6. Set the statusParameterOptionType parameter to 1. Confirm by using the
corresponding Get command.
7. To read the name of the video standard , get the statusParameter parameter.
To read its SMPTE 352 ID , get the statusParameterDataValue parameter.