OmniTek OTR 1001, User Manual

Page: 159 / 390

OmniTek OTR 1001 User Guide, v3.1 I-35
I.10 Error Reporting
Limits can be placed on aspects of 3D video such as the range of depths covered and on the
extent to which the Right-eye image differs from the Left-eye one (reflecting differences in
camera setup). Similar differences between a non-3D image and a chosen reference image also
provide camera setup information.
As with other aspects of video status and error reporting, current values are reported through the
Status Overview (called up as described in Section E.6) while the circumstances under which
these values are reported as being in error are set within the 3D settings section of the Video
Config page of the Config window (called up as described in Section T.2). The status details are
also displayed in the form of a Status Summary (available via the Video button on the Status
View Button Bar).
Figure I-29: 3D settings section of the Video Config page.
Figure I-30: 3D and Camera setup data shown in the Status Overview.