OmniTek OTR 1001, User Manual

Page: 352 / 390

OmniTek OTR1001 User Guide, v3.1 U-6
Control Panel Mouse & Keyboard
Route 2: Principally used to export a selection of files
1. Display the Manage User Files dialogue as
described in Section U.2.
2. In the left-hand side of the dialogue,
highlight the category of User file that you
want to export by twisting the GENERAL
knob, then press GENERAL.
3. The right-hand side of the dialogue then
shows a list of the files in the default
location of the selected category. To select
a different category, take the
Back option
from the Button Bar.
4. Twist the GENERAL knob to select each
file you want to export then either press
GENERAL or use the Toggle Check option
on the Button Bar to tick this selection.
Note: Ticking All selects all the listed files.
1. Display the Manage User Files dialogue as
described in Section U.2.
2. Click on the category of user file you want
to export in the left-hand side of the
dialogue.
3. The right-hand side of the dialogue then
shows a list of the files in the default
location of the selected category. To select
a different category, simply click on its
name.
4. Tick the files you want to export by
clicking on the check boxes.
Note: Ticking All selects all the listed files.
5. Take Export from the Button Bar.
6. Use the dialogue that is displayed to select the folder into which you want to copy the
exported files. If needed, use the
Create new option offered on the Button Bar to create a
new folder in which to store these files.
Note: The files are stored under their existing names. The use of separate folders is therefore
recommended to distinguish between separate sets of User files.
7. Select OK from the Button Bar to copy the files to the selected location.
8. At the end of the process, you are returned to the Manage User Files dialogue. If you have
finished with the dialogue, select
Back then Close .