OmniTek OTR 1001, User Manual

Page: 69 / 390

OmniTek OTR 1001 User Guide, v3.1 D-3
D.3 Changing the Range of Views Displayed
Once in Edit mode, the range of Views that make up the display may be changed through a
combination of:
Switching what is shown in the current tiles, and either
Closing tiles that you no longer require, or
Adding any extra tiles that are required.
Switching the Views Shown
The View shown in any tile may
be replaced by another in exactly
the same way as this is done
outside Edit mode (details given
in Section C.2).
In particular, the required View
may be selected by right-clicking
on the tile and taking the
Replace tile option from the
menu that is displayed (as shown
here).
Removing Unwanted Tiles
Mouse & Keyboard
Toremove a tile that you don’t require:
1. Click on the tile to select it.
2.
Click on the Close box (‘X’ box) in the top right-hand corner of the tile window surround.
Figure D-5 : Location of Close box on selected tile
Close box
Figure D-4 : Right-click menu showing Replace tile option