OmniTek OTR 1001, User Manual

Page: 213 / 390

OmniTek OTR 1001 User Guide, v3.1a K-29
Setting the Speaker
Volume
The volume at which the
audio is played out is set in
the Audio Monitor section of
the Properties control.
Speaker Volume
The Speaker Volume sets
the volume at which the
audio is played back as a
percentage of the selected
monitor’s maximum level.
Control Panel Mouse & Keyboard
To set the required volume: General Method
Set the required level in the Properties control.
Alternative method when an AUDIO View is selected:
Twist the VERT knob. Scroll the scroll wheel on the mouse (where
there is one).
On changing the volume in this way, the OTR automatically shows a Volume
indicator which reacts to the changes you make.
Note: If Mute is selected (see
below), this indicator is shown overlaid with a ‘No Go’ symbol.
Speaker Mute
Control Panel Mouse & Keyboard
To select Mute/toggle the current selection: General Method
Tick the Speaker Mute option in the Properties control. The output instantly becomes muted.
The Volume indicator described above is also displayed temporarily.
Alternative methods when an AUDIO View is selected:
Either: Select the Mute option from the Button Bar. This toggles the Speaker Mute setting
between ticked and clear i.e. between the sound being audible and being muted.
Or: Press the VERT knob to switch the Mute
option.
Or: Press the scroll wheel on the mouse (where
there is one) to switch the Mute option.
Figure K-21: Audio PPMs Button Bar.
Figure K-20: Audio Monitor Properties